Production Details, Stage Plot, & Rider
Production Details
STAGE REQUIREMENTS:
1. Stage must be cleared of any excess equipment prior to Artists' arrival.
2. If venue is
outdoors, stage must be protected from sun, wind and rain.
3. If stage is upstairs, please provide
additional crew to assist with equipment.
4. The recommended minimum stage size is
24'x16'X2'.
5. One carpeted 8x8x1 drum riser or larger, is recommended.
ELECTRICAL NEEDS:
Minimum of four separate 20-amp, 120-volt outlets are needed, accessible to each band members position according to stage plot. Should be separate from
lighting system.
SOUND PRODUCTION:
Professional quality system with sub-woofers, mixing board that
can accommodate a minimum of 24 inputs, in good working order, capable of reaching 100db
SPL peaks in the back seats of venue, free of noise or distortion. Must provide standard Outboard
Effects (i.e., Reverb, Hall, Limiter, Compression, etc.), *minimum of 3 DI boxes as indicated on
stage plot
*Minimum of one wireless hand-held vocal mic, (2 recommended).
*A professional FOH sound engineer, present for entire show.
LIGHTING REQUIREMENTS:
Lighting provided by Purchaser is required for all indoor
performances. If performance is outdoors and scheduled to begin or end after sun set, stage
lighting is also required. The lighting is to be of professional quality, and capable of brightly
illuminating each member's primary on-stage position, with colored wash. Follow Spot for lead
vocals or front of stage up-lights required.
*Qualified lighting technician is required.
LOAD_IN/SETUP TIME:
Allow up to 3 hours for unloading equipment, setup and sound check.
Free and clear access [no stairs] for loading and unloading equipment. If a load-in has stairs, an
elevator must be available, or the purchaser must provide extra personnel (at no cost to artist) to
assist in loading and unloading. Loading and backstage areas to be clear of all vehicles,
equipment prior to load-in and load-out.